vStack-R
Benefits
Guaranteed compatibility
Tested and validated especially for the Stingray Service Gateway software
Efficient logistics
Short and predictable delivery times anywhere in the world
High reliability
Warranty support from three years at vStack-R service centers worldwide
Cost-efficiency
vStack-R servers combine an excellent balance of cost, functionality, and reliability
Platform for the Stingray Service Gateway
Rack-mounted single-processor 2U server vStack-R-ASR201 is designed for use in the IT infrastructures of telecommunications companies with exceptional requirements for expandability and the use of a variety of network interfaces. This is a universal model, suitable both for organizing systems of control and analysis of network traffic, and as an edge server to support a wide range of workloads of a remote branch office of the organization.
High performance
- One AMD EPYC 7001 (Naples), 7002 (Rome) or 7003 (Milan) series processor.
- Eight channel memory mode and 16 DDR4 ECC memory slots up to 3200MHz (RDIMM/LDRIMM).
Flexible options for organizing storage and network I/O subsystems
- 8 universal bays for 2.5″ and 3.5″ SATA/SAS drives on the front side with hot-swap support.
- Optional module for up to two (2) 2.5″ NVMe drives on the rear side.
- 10 PCIe slots: 1 full-height, double-width and 9 half-height.
Platform for data storage
The vStack-R-SL401-D36RE-G3 rackmount dual-processor 4U server is a flexibly scalable platform powered by industry-standard components. This versatile model can be used to create software-defined storage, analytics, database, and multimedia storage solutions.
High performance
- Up to two (2) Intel Xeon Scalable Gen3 processors, each up to 270W (Ice Lake).
- 32 DDR4 ECC 3200 MHz (RDIMM/LRDIMM) memory slots, including support for up to 16 Intel Optane 200 Series non-volatile memory modules (PMem).
Flexible options for organizing storage and network I/O subsystems
- 36 front- and rear-facing, hot-swappable universal bays for 2.5″ and 3.5″ SATA/SAS drives.
- 1 OCP 3.0 slot for network card installation.
- Up to 10 PCIe 4.0 slots (6 full height, 4 half height).
- The half height PCIe slots can be replaced with hard drives by installing two disk modules, supporting up to four (4) 2.5″ SATA/NVMe drives on the rear side.
- Motherboard with two on-board M.2 NVMe 2280 interfaces.
Platform for general computing
The vStack-R-SL201/SR201 is a rack-mountable 2U dual-processor server designed for use in dynamically scalable infrastructures with high performance requirements. It is a versatile model suitable for supporting a wide range of workloads such as container and microservice architectures, hyperconverged solutions and software-defined storage (SDS).
High performance
- Up to two (2) Intel Xeon Scalable Gen3 processors, each up to 270W (Ice Lake) – Model SL201
- Up to two (2) AMD EPYC 7001 (Naples), 7002 (Rome) or 7003 (Milan) series processors. — Model SR201
- 32 DDR4 ECC 3200 MHz (RDIMM/LRDIMM) memory slots, including support for up to 16 Intel Optane 200 Series non-volatile memory modules (PMem).
Flexible options for organizing storage and network I/O subsystems
- Up to 12 universal 2.5″ and 3.5″ drive bays, or 25 front-facing, hot-swappable 2.5″ SATA/SAS/NVMe drive bays.
- 1 OCP 3.0 slot for network card installation.
- Up to 10 PCIe 3.0 slots (6 full height, 4 half height). Half height PCIe slots can be replaced with hard disk drives by installing up to four (4) 2.5″ SATA/NVMe drives on the rear side.
- Support for installing 2 powerful graphics adapters (e.g. NVIDIA A800)
- Motherboard with two on-board M.2 NVMe 2280 interfaces.
Remote control
All vStack-R servers are equipped with an integrated Baseboard Management Controller (BMC) that supports Remote Management and Monitoring IPMI 2.0.
The operation of BMC does not depend on the operating system of the server and provides the following features through a dedicated 1Gb RJ45 port:
Management interface
